Grega Painting's Process for Commercial Interior Painting

Epoxy can experience adhesion issues under certain conditions. It doesn't adhere well in very cold temperatures or in humid, high-moisture areas like basements or bathrooms. Poor adhesion can cause the epoxy coating to crack and peel. Therefore, it's essential to carefully consider the specific placement of the epoxy coating.

Here are the key steps to take before applying concrete stain:

• Remove all previous sealers, paints, adhesives, and coatings completely.
• Thoroughly clean the surface.
• For acid concrete stain, prepare the surface with a concrete etch and cleaner, then rinse thoroughly. Avoid using muriatic acid, as it will destroy the minerals that create the stain's color range.
• To clean the surface for a water-based stain, use dish soap and water. For oil spots, use a degreaser and neutralizer dil uted in a 4:1 ratio. Finally, rinse the concrete thoroughly.
• If the concrete surface is too smooth or dense to absorb water, it will require mechanical sanding to roughen the surface, allowing it to accept the stain.

A spray texture application enhances a wall with visual interest and physical texture. There are three types of spray texture.

1. Popcorn - Also known as acoustic or cottage cheese texture, it features a bumpy, irregular appearance resembling small popcorn kernels. Commonly applied to ceilings, this texture helps conceal imperfections and absorb sound, providing a rustic and textured finish.
2. Orange Peel - This texture resembles the subtle, dimpled surface of an orange peel. It provides a smooth yet textured finish that hides minor flaws and adds visual interest to walls and ceilings.
3. Sand - This texture has a gritty, sandy appearance, created by incorporating fine sand particles into the paint mixture. It provides a more textured, tactile finish, similar to sandpaper. This adds depth and dimension to surfaces, enhancing their visual appeal while helping to mask imperfections.

If the trim is new or already smooth, lightly sand it with 120-grit sandpaper before painting. If the trim is pitted or rough, start with 80-grit sandpaper and gradually move to 120-grit sandpaper. You don’t need to completely remove all the old paint before adding new paint.

Once the seams are taped and finished, we suggest applying two coats of high-quality paint for a smooth, even finish.

If you're working on a commercial interior painting project in Fairfield, Westport, Milford, Weston, Easton, Redding, Norwalk, Darien, or nearby areas and are looking for a professional painting service, reach out to Grega Painting today. We’d be happy to provide you with a free quote.